Product Description
Track Width
- Fits all Caterpillar 299C undercarriages
- SKU: B450X86X60T-CR299C
Turf Tread — Is It Right for Your Work?
| Pattern | Best Used For |
|---|---|
| Bar | Flat terrain · large ground contact · stability on firm surfaces |
| Block | General purpose · hardpack · dirt · long pavement runs |
| C-Lug | Mixed terrain · grading · site work · on/off road · concrete & dirt |
| Split Bar | Bidirectional traction · shock absorption · smooth ride on varied ground |
| Turf ✔ | Lawns · landscaping · minimal ground disturbance |
| Z-Lug | Steep grades · snow · ice · maximum traction applications |
The Turf pattern is purpose-built for operators working on finished lawns, golf courses, sports fields, or any surface where ground disturbance must be minimized. The low-profile tread reduces turf tear during turns and leaves a lighter footprint than any lug or bar pattern. Not designed for aggressive digging or muddy conditions.
Know Your Machine: Caterpillar 299C Undercarriage Facts
The 299C is a vertical-lift Caterpillar compact track loader with a 4,150 lb rated operating capacity. At approximately 10,730 lbs operating weight, it delivers strong pushing and lifting performance for landscaping, site prep, grading, and utility work.
Track Dimensions
| Size | Width | Pitch | Links | SKU |
|---|---|---|---|---|
| 450mm Width (450×86×60) | 450mm (17.7") | 86mm | 60 | B450X86X60T-CR299C |
Complete Your 299C Undercarriage
Replacing tracks? Consider replacing your sprockets at the same time — worn sprockets destroy new tracks. All parts below are confirmed to fit the Caterpillar 299C.
*Product names are used to describe the correct application and do not indicate affiliation or endorsement by the respective equipment manufacturer. Caterpillar® is a registered trademark of Caterpillar Inc.. ⚠ Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and reproductive harm. For more information visit www.P65Warnings.ca.gov.
*The product name is intended to describe the correct application and does not indicate affiliation or endorsement of the respective machine maker.
