Product Description
Ditch Witch SK1050 Hub and Spindle Assembly
Aftermarket OEM Replacement – Part #205-1216
Restore proper undercarriage performance on your Ditch Witch SK1050 with this hub and spindle assembly from United Skid Tracks. This assembly is designed for reliable fit and long service life and is commonly used on idler rollers and bottom rollers.
Alternate Part Numbers
- Dealer Part Number: 205-1216
- Supersedes: 205-1183
Detailed Verification
This assembly includes lug nuts 105-1602. The dust cap retainer 205-1213 has been replaced with a screw-on cap design that helps prevent cap loss during operation.
Torque Specification: Lug nuts should be torqued to 85 ft-lbs to prevent damage to the sprocket.
Serial Number Break – Quantity Required
Requires 5 per side (10 per machine):
- Begins with S/N: CMWSK750JF0001028
- Begins with S/N: CMWSK755CF0001057
- Begins with S/N: CMWSK850HF0000362
Requires 3 per side (6 per machine):
- DWPSK150HK0001544
- DWPST37XJK0000077
- DWPSK755PJ0001253
- DWPSK800EJ0000942
- DWPSK105PJ0000589
- DWPST37XCJ0000029
Important Note: For the serial numbers listed above in this range, this hub will not fit the rear idler wheel.
Begins/Ends Serial Break:
- Begins with: DWPSK755PJ0001253, DWPSK800EJ0000942, DWPSK105PJ0000589, DWPST37XCJ0000029
- Ends with: DWPSK105K0001543, DWPST37XKK0000076
Fitment Note: There is another larger tapered hub and spindle assembly 302-6126 used on the large rear track roller 140-1452 on certain serial ranges. Always remove and verify your existing part before ordering.
WARNING: Cancer and Reproductive Harm. See www.P65Warnings.ca.gov
